Samsung Dryer HE Error Code

Dryers are essential while doing laundry. When your dryer breaks down and starts showing some error, it is natural to begin to panic. There can be multiple reasons why your dryer might have issues working properly.

If you are using a Samsung dryer and facing a Samsung dryer HE codes error, Samsung dryer vent sensor error, Samsung steam moisture sensor HE dryer error, if the Samsung dryer is not drying clothes, Samsung gas dryer not heating, or other issues, then you should no longer worry as you have come to the right place.

Just read the article below to get to know the troubleshooting tricks for your Samsung dryer.

Samsung Dryer HE Code

What is Samsung Dryer HE Code Error

Imagine you are doing your laundry. Your clothes are already washed and dripping wet. Now, all there is left to do is put them in your Samsung dryer to dry them while doing other chores. Suddenly, you see your Samsung dryer flashing hE, and the Samsung front load dryer won’t heat. What do you do now?

Firstly, you need to know Samsung dryer symbol’s meaning. You need to understand what HE code means.

This usually means that your dryer is having issues heating up. This could be because of two different reasons. Your dryer’s vent might be clogged, or you are using a defective lint basket that now allows enough air to flow and heat the machine. 

If these are the reasons, fixing these issues is not a big deal. You just have to clean your dryer or replace the parts; that is it. Also, you can try to reset the Samsung dryer if you see the Samsung dryer touch screen not working. 

Now comes the question, how to reset the Samsung dryer control board? Let us see what to do down below:

  • Disconnect or unplug your dryer.
  • Wait for a minute or two.
  • Plug back the dryer and restart.
  • Run the program once more.

You should be good to go now if your dryer is not having any other serious issues.

Different Types of Samsung Error Codes

Samsung error HE or HCWhen the dryer drum overheats.
Samsung error 5EThis means the water tank is full.
Samsung error 3EThe motor must not be working.
Samsung error 2EThe dryer might not be plugged in.
Samsung error dF or dE Laundry could be caught in the door.
Samsung error tE2, tE, or tE4The condenser or the lint trap might be clogged.
Samsung error tE5Problem with the compressor’s temperature.
‘Empty water container’ Error The water container is full.

How to Fix Samsung Dryer He Error Code

There are two kinds of dryers out there. Both need different types of repairments. These two kinds of dryers are a gas dryer and an electric dryer. Let us see what to do with both of these dryers if they show error code HE. 

Gas Dryer

Samsung dryer not drying clothes? If your dryer is a gas dryer, then the problem could be the gas supply. 

First, you have to find the supply cut-off valve to fix this problem. Then, unplug the dryer from the power source. Inspect the wiring and fix loose connections to connect the wires. Now, you should be good to go.

If none of the troubleshooting above works, you should call a professional for help who will fix your problem. 

Electric Dryer

If you are using a Samsung electric dryer and it is showing an hE code error, it is probably because your machine cannot heat properly or overheat. Basically, the power supply must be having some issues. Let us look into the steps to solve this issue.

Steps To Take with Error Code HE with an Electric Dryer

  1. Turn off or unplug the dryer for a good few minutes.
  2. Check if the dryer is working after turning it on once more.
  3. If it does not work, turn it off again.
  4. Press’ mixed laundry’ and ‘time,’ or ‘mixed laundry’ and ‘dryness level’ at the same time.
  5. Then, turn the dryer on.
  6. Stop pressing the buttons when all lights are on or the DE sign appears.
  7. Lastly, turn off the dryer and then turn it on again. 

Thermistor Issue 

Samsung steam dryer troubleshooting includes taking care of the thermistor issue. If there is an issue with the thermistor, your dryer might also show a HE code error on the display screen. Samsung dryer lint filter light flashing? This could also be because of the thermistor.

Keep an ohmmeter with you for this issue. This will clear the air if your thermistor’s quality is up to the mark or not. The reading should approximately be 10,000 ohms. If the reading is not that many ohms, you should replace your Thermistor.

Steps to Take to Replace a Thermistor

  1. Turn off the dryer.
  2. Then, unplug your dryer.
  3. Find the thermistor, which is going to be right next to the thermostat.
  4. Use your ohmmeter or multimeter on the thermistor and test it.
  5. If your thermistor fails the test, you have to replace it yourself or by calling a professional.

Clogged Vent System or Lint Screen 

If your vent system or lint screen gets clogged, your dryer might start overheating and cause an HE code error. Your first and foremost job will be to clean your lint screen or vent system, or even both. 

If cleaning does not work, replace your Lint Screen or vent system. But, always remember to keep them clean, or they will eventually get clogged in time. 

This could result in your clothes drying for longer and longer over time. Clothes might not even be completely dry. This might cause even fires.

Signs Your Vent is Clogged

  • Clothes dry for longer
  • There is debris around the dryer’s vent opening 
  • Excessive heat coming off the dryer
  • You have not cleaned the vent in a while
  • Debris around the lint filter

Heating Element 

Samsung dryer power button not working? This could be the result of a broken heating element. A heating element is supposed to warm your dryer from the inside so that all your clothes are getting the proper heat to dry. 

A partly shorted-out or damaged heating element might keep heating the dryer even if the dryer has reached its optimum temperature. This can overheat the dryer and cause problems. 

It would be best if you use a multimeter to test when troubleshooting this issue. If there is no continuity, you have a shorted-out heating element in your hands. So, you might need to replace the Heating Element. 

Felt Seal

Samsung dryer blowing up? This could be the result of a worn-out Felt Seal. The felt seal is situated on the front of the dryer drum, which is a thinner fabric, but a thicker fabric seal is situated around the back.

This felt seal is there for a reason. It optimizes energy efficiency. If dryers are appropriately sealed with a felt seal, then too much heat will not get out from inside the dryer unnecessarily.

If your dryer felt is missing, worn, or ripped, the heat will get out, and air will enter back inside the dryer drum. Your dryer will overheat if the heat keeps escaping past the damaged felt. This could also result in the dryer blowing up due to overheating.

If the felt seal is not tightly sealed around the dryer drum, you should definitely get it replaced and check if everything else is in order.

Final Word

Having a broken dryer in your hands is troubling. If your Samsung dryer is showing an HE code error, you need to fix the problem no matter what. Following this article and all the instructions above, you should be fine.

If nothing works or there is something that you cannot seem to fix by yourself, then you should definitely call a technician and get help. Otherwise, best of luck with your journey of fixing the Samsung dryer code HE error. 

More articles to read now:

Abdulla Zatar
About Abdulla Zatar

Hi, I’m Abdulla! Your go-to tech troubleshooter! Sharing my knowledge so that you can fix your tech issues with ease. Let’s make fixing things easy and fun!

Leave a Comment